Bi-Fold Door Manufacturing & Bifold Door Installation for Aircraft

Aircraft Hangar Bi-Fold Door Design

Turnkey Door Solutions

Every bi-fold door is built to meet your dimensions and concept and can be delivered, installed and regularly serviced by one company - AeroDoor.

Bi-Fold Door Clearance

We can supply bi-fold doors that offer a higher "clear opening" than other bi-fold hangar door manufacturers. This will allow you to reduce the height of your new hangar (saving $) or increase access.

Unbeatable Design

Aircraft Hangar Bi-Fold Door ClearanceClass A513 steel tubing on the door, heavy gauge steel tubing for the door trusses and strong factory welded leaf type hinges deliver a tough, resilient bi-fold door system.

Sheeting & Insulation *

The type of sheeting and insulation you choose is your choice. This means the bi-fold door can be modeled to suit any new or replacement hangar door project.

Weatherstripping

Quality weatherstripping at the top, bottom and between door frame and building jamb allows our customers to control the temperature of the hangar if necessary and prevent dust or sand intrusion.

Bi-Fold Door Engineering

Aircraft Hangar Bi-Fold Door ConstructionAll bi-fold doors are designed and engineered to meet local building code and wind load requirements. Signed and sealed delivery permits can be delivered when necessary.

Bi-Fold Door Upgrades *

Choose the hydraulic lift upgrade to increase the speed for a reduced cycle time! The door will travel 2-times faster than standard gearbox driven bi-folds doors that are sold by other bi-fold hangar door manufacturers.

Installation & Service

Aircraft Hangar Bi-Fold Door SheetingAeroDoor has a dedicated service division to provide hangar door installations, repairs and upgrades on most brands of hangar door. When you choose AeroDoor, you're getting a guarantee that you'll to be looked after for a lifetime.

*Not a standard feature.

A bi-fold hangar door that is strong, dependable and can now offer up to 24-inches more access to your building than any other bi-fold door on the market. That’s more clearance for the same size of door as our competitors - or opportunity to reduce the height that your building needs to be.

This bi-fold hangar door can replace existing sliding or overhead doors without sacrificing door opening clearance or changing the roof line. A double strength center hinge design eliminates sagging in the center of the door and optional patented auxiliary arms allow a higher clear opening than other bi-fold door manufacturers. The strong welded steel frame and trusses will withstand high winds and ‘no nonsense components’ make this a low to zero maintenance door for every aircraft hangar or building that needs long lasting and dependable big doors.

Cables used on the bi-fold door are aircraft grade cables with a 5:1 safety factor and we are so confident these cables are the safest out there we include a lifetime warranty. Something you may not find from other bi-fold hangar door manufacturers.

Aircraft Hangar Bi-Fold Door Seals Aircraft Hangar Bi-Fold Door Engineering Aircraft Hangar Bi-Fold Door Motor Aircraft Hangar Bi-Fold Door Installation

Source: www.hangardoors.aero

OTC 26 Pocket Over Door shoe craft makeup Organizer-For Bi-Fold Doors-Assorted Colors
Home (OTC)
  • 70 long x 19 wide.-Assorted Colors-Dark Blue or Light Tan/Off White with clear vinyl pockets.
  • Hooks fit over bi-fold doors or shower stalls.
  • Hooks measure 1 2/8 deep. (Please note measurements before purchase).
  • Canvas-like material. Clear vinyl pockets. - Great for Shoes, Craft items, toys, cleaners, etc etc.
  • 24 vertical pockets and 2 horizontal pockets.

You might also like:

Mirror Bifold Door Installation
Mirror Bifold Door Installation
Bifold Door Installation Video
Bifold Door Installation Video
Bifold Door Installation
Bifold Door Installation

That will look like crap

Bifold doors are usually made up with rails and stiles . If you rip down the stiles you will have a door that looks like a hack job . Plus if you were to rip 1" off each door you would need to rip 1/2" off each stile of each door and you would still be left with a door that doesnt look proportionate . Do not cut 1" off 1 side as you suggest . You would also then be redoing the hinge mortises and hardware . Too much work for little return .

L E JOHNSON L E Johnson 60' Bifld Dr Hdw Set 1700606H Closet Door Hardware
Home Improvement (L E JOHNSON)
  • l E Johnson #1700606H 60 Bi-Fold DR HDW Set
  • L E JOHNSON
Bifolding Doors Installation Guide
Bifolding Doors Installation Guide

Related posts:

  1. Wooden Bifold doors
  2. Custom Bifold Doors
  3. Metal louvered Bifold doors
  4. Solid Double Doors
  5. Closet BI Fold doors

  • Avatar niner_72601 Partially replace my existing cabinets?
    Jan 21, 2007 by niner_72601 | Posted in Decorating & Remodeling

    I have cabinets in my kitchen that are painted.......i want to go oak face frame and doors...............can i pull off the existing face frame, and replace with an oak one......my question is......whats the best way to build the frame......dowels?

    • The face frames may be a beotch to replace; they were built on the cabinet boxes, or glued to them. Just depends on the construction. The best way is to use pocket screws. There is an angled hole (pocket) drilled into th …e fancy machine).

      Otherwise, you just apply the boards individually to the cabinet box and pin the edge that hangs down with a finish nail (not the best method, but it's done on built in shelves everyday).