Pemko Hinge Products|Aluminum Hinges|Continuous Hinges|Door

Select another product

Pemko Hinges

PemkoHinge(TM)
Suitable for new construction and replacement work, PemkoHinge consists of two full-height, geared leafs. Each leaf rotates on DelrinTeflon bearings, ensuring smooth operation. A full-length channel cap holds leafs and bearings together, and provides a refined look. PemkoHinge distributes the door's weight along the frame's entire length, so heavy vertical loads are supported easily. Door sag, warpage and binding, common problems in butt hinge installations, are eliminated. By eliminating the gap between door and frame, PemkoHinge also enhances privacy, security and safety. valign="top">
PemkoHinge™ products are GUARANTEED FOR THE LIFE OF THE OPENING against defects in material or workmanship.
Pemko Hinge Attributes
With a continuous hinge, typical alignment problems, such as door sag and binding are eliminated. Unlike conventional hinges, the continuous hinge distributes load stress uniformly along the full length of the door and frame.

The gear design of the continuous hinge ensures identical operation of each leaf; therefore; very little effort is required to open heavy commercial doors . Continuous hinge attaching screws are located along the full length of the hinge, thereby preventing warping of the door along the hinge jamb.
Full length channel cap creates clean lines and provides security safety, and privacy
A high degree of security can be achieved for exterior openings or restricted spaces by using a continuous hinge. With the geared construction and the full length channel cap, the common gap between the door and frame is sealed, which provides security against prying. These hinges are available in bronze and aluminum. They are also offered in 83” and 95” lengths. Pemko continuous Hinges are on hand in full surface and full mortise.

Source: www.a-porcel.com

Radio Systems Corporation PetSafe Telescoping Aluminum Wall Entry Pet Door, Large
Pet Products (Radio Systems Corporation)
  • Pet door with telescoping tunnel for installation in both 4- or 6-inch (nominal) wall construction
  • Double flap construction with adjustable sill and extra strong magnets for excellent insulation
  • Durable aluminum frame with non-rusting, locking closing panel for reliable entry
  • For dogs up to 100 pounds; double-flap system insulates for energy efficiency
  • Fits walls 4-3/4 to 7-1/4 inches thick; measures 12-3/4 by 18-3/4 inches; flap measures 10 by 15 inches

You might also like:

Fixing Stripped Door Hinges
Fixing Stripped Door Hinges
Installing a Door Hinge
Installing a Door Hinge
Altherm Bi-Fold and Hinged Doors.mov
Altherm Bi-Fold and Hinged Doors.mov

Exterior French Doors: Inswing vs. Outswing ????

So I have been trying to locate some outswing exterior french doors for quite some time, and they are SO expensive. I am wondering why I cant use an inswing door and flip them around. I realize I will have to remove the bottom transom or sill, whatever you call the aluminum at the bottom. Can this be done ?

Dynasty Hardware Dynasty Hardware 36" Push Bar Panic Exit Device, Aluminum, With Exterior Lever
Home Improvement (Dynasty Hardware)
  • Reversible, non-handed - Panic Hardware - With Exterior Keyed Lever
  • For use with standard 1.75 inch thick doors
  • Dogging Feature
  • Aluminum Finish
  • 10 Year Factory Warranty
How to Replace Door Hinges
How to Replace Door Hinges
replace door hinges to fix sagging …
replace door hinges to fix sagging …
How to Install or Replace Door Hinges
How to Install or Replace Door Hinges
Skotz Manufacturing, Inc. MagneBlind Magnetic Aluminum Mini Blind 25Wx68 1/2L No Tools Required
Home (Skotz Manufacturing, Inc.)
  • No tools, attaches in seconds
  • Fits all steel doors
  • Will not leave holes or marks on steel doors
M-D Building Products M-D Building Products 87783 Compression Weather Stripping with Aluminum Stop, 36-by-84 Inches, Bronze
Home Improvement (M-D Building Products)
  • All season protection against drafts, moisture, dust and insects
  • Compression weatherstrip conforms to irregularities in door fit
  • Fits doors up to 36 inches wide
  • Fasteners included
  • 1 piece 36 inches long for top, 2 pieces 84 inches long for sides
Aleco Aleco 440000 Clear-Flex II Standard Smooth Strip Door Kit with MaxBullet Aluminum Mounting Hardware, 8" Width x 84" Height x 0.08" Thick
BISS (Aleco)
  • Aleco Clear-Flex II strip measures 8 x 0.080 ; fits 3 x 7 door; 50 percent overlap and kit includes MaxBullet aluminum mounting hardware
  • Formulated for indoor/outdoor applications, withstanding temperatures from -10 degree F to 150 degree F
  • Will not discolor in sun light
  • Our most versatile material
  • Easy pass-through

Related posts:

  1. Interior Aluminum Door Frames
  2. Exterior aluminum doors
  3. Exterior Sliding Doors